The KeyMicro Adapter is used in conjunction with our P-Series pistol socket as found in the Wolfman, Mojave and Ghost-M products and is compatible with KeyMicro muzzle devices. This is the same proven mounting technology found in our KeyMo system but sized down with weight savings for your pistol silencers.

Simply unthread your booster assembly or fixed mount and thread in the KeyMicro Adapter.

*While the KeyMicro Adapter is compatible with our KeyMo and KeyMicro muzzle devices, fitment will depend on the suppressor. Smaller blast chambers are typically found in suppressors that are optimized for pistol cartridges. The KeyMicro Adapter was designed first and foremost to pair with our KeyMicro muzzle devices, but will also work with some full size Keymo muzzle devices depending on the suppressor.

The post Key-Micro Adapter for Ghost-M / Wolf 9SD / Wolfman appeared first on Smileys Armory.

The Titanium K from OCL is a tiny powerhouse and little brother to the full size Titanium can. While the full size Titanium is already incredibly light at 4oz and only 5.18″ long, the Titanium K comes in at a featherweight 3oz, and only 3.5″ long for ultra compact situations. Whether on the end of a small critter getter for nighttime pest dispatch, or on the end of your favorite rimfire rifle to make shooting more pleasant for new shooters, the Titanium K has a home across all of your rimfire platforms.

Comes in a Black PVD coatings and 1/2×28 threads.

The Titanium K is limited to a total run of 2000 units across all distributors and dealers. Once they’re out of stock, they’ll be gone until next year when another run of 2000 units will be done. Get yours now, or be left holding the bag until next year when the Otters emerge from their den with another limited run.

The post Titanium K appeared first on Smileys Armory.

Product Specifications and Use Restrictions

Suppressor Cover – Black, FDE, and Wheat Tan – Kevlar fabric is heat rated to 1000 F sustained and 1500 F and max temp. (DESIGNED TO WITHSTAND 90 ROUNDS FULL-AUTO BEFORE ALLOWING TO FULLY COOL OFF)

*Note* Be weary of any company claiming a higher rating than above as this is data gathered directly from the developer of Kevlar and Nomex fabrics, DuPont…

Safety recommendation: If the suppressor is too hot to touch with the cover on, you should allow it to cool off before handling or resuming your firing schedule. We have found this to be at roughly 90 rounds fired. Keep in mind, the suppressor and cover will take some time to reach its thermal peak after being fired full-auto or mag dumping. Typically, the suppressor will rise 7 F for every shot fired of 5.56.

Custom Order Disclaimer: These are custom covers and are sold as is. There shall be no refunds or exchanges after your order is submitted. If you damage them due to excessive heat (discoloration included), improper installation due to user error, or incorrect sizing; we will not replace or warranty them.

The post BPG Suppressor Cover Custom- Nomad TI 6.5″, Black appeared first on Smileys Armory.

Gemtech, Nebula, Suppressor, 5.7X28MM, Removable Direct Thread Mount, 1/2X28, Titanium, Cerakote Finish, Black, 9oz

The post Gemtech, Nebula, Suppressor, 5.7X28MM appeared first on Smileys Armory.

• Patent Pending EZ-LOK universal QD piston attachment system
• 1 Mounting orientation, for simple mounting in approximately 4-5 seconds
• Internal taper surface locks in place with interfacing barrel adapters and drastically reduces or eliminates common baffle/end cap strikes
• Compatible with Universal QD pistons barrel adapters (sold separately)
• Total system weight is identical to legacy direct thread pistons
• H900 heat treated for improved durability and wear resistance
• 17-4 stainless steel material
• QPQ Nitride finish for attractive, durable black finish

The post Griffin Armament EZ-LOK Piston Insert 1/2×28 (Special) appeared first on Smileys Armory.

Revolution® MOD 4 replacement O-ring kits keep your Revolution® MOD 4 suppressor in tip-top shape. This full replacement kit includes: (11) Small O-Rings and (2) Large O-Rings. The small o-rings should be used on each of the baffles. Both the end cap and tube extension require one small o-ring, and one large o-ring.

This kit is for both the Revolution® 9 and 45 suppressors, so if you have a Revolution® 9 and purchase this kit, you will receive one extra small o-ring, which is used only in the Rev 45

The post Revolution Mod 4 Replacement O-Ring Kit appeared first on Smileys Armory.

• Integrated EZ-LOK Mounting System
• EZ-LOK Barrel Adapter (1/2×28) – included (Click Here to purchase additional barrel adapters)
• Ultra-durable Nickel 625X Alloy Construction
• Additive Manufacturing
• Rated up to .223 Rem

The post Griffin Armament Checkmate-AM22 Silencer appeared first on Smileys Armory.